|
| CSF-25000/8
High Power CO2 laser power supply
Manual
for CO2 laser products
Key Features
- Built-in AZCS (Auto-Zero-Current-Switching) Circuit
- Multiple
Outputs to 8
- AC
input from 180V-480V
- For
the Toughest Environments
- Fail-Safe
Design
|
--- Product Specifications ---
Output1(Burst Pulse):
- Output Power:
- 25KW
- Striking Voltage:
- 25KV
*1)
- Operating Voltage
- 4KV
to 20KV
- Output Configuration:
- Independent
8 outputs, +, Or - polarity
- Operating Current
- Total
1.7 amps
- Operating Mode
- CW
& PULSE
- Pulse Rep. Rate
- DC
to 2KHz
- Pulse Width
- 100µs
to DC
- AC Input Voltage
- 200V,
or 480V, Three Phase*3)
- Efficiency
- Greater
than 93%
- Regulation
- Less
than 2%
- Protection Mode
- H.V.
Over current, H.V. Over voltage, IGBT Over current(2), Over
Temperature, Leakage currents, Phase detect,
- Control Signal
- 0-5V
Ground referenced signals:
- Totally
25 Signals, Refer to interface
Simmer mode: Available both in CW and Pulse mode. Simmer current
is adjustable from 0-50mA/ch.
Ramp up: Available both in CW and Pulse mode. The ramp up time
is adjustable from 0 -100 msec
- Dimension
- 5.40"(H)x14.50"(W)x23.80"(L)
inch
- Weight
- 88
lb
- Cooling
- Water
cooled: Water temperature maximum 25C, flow rate 5l/minutes
minimum, water pressure 3 kg/cm2 minimum required. 3/8"
NPT water inlets.
- Insulation
- AC
480V Input - Frame Ground: 1500V/1 minutes Insulation resistance
more than 5 M ohm.
- Options
- 1)
Higher Striking Voltage to 35KV
- 2)
Higher H.V Current
- 3)
Different AC input voltage available
- 4)
Custom
interface available, please contact us for more information.
