CPF-600P/PD - Compact & High Power CO2 laser power supplies


Click image for larger view

Click here for
Product Manual
    Unique Core Design:
    The output transformers are very thin, which helps the heat conduction effectively to the water channel and keeps the H.V components operating temperature low.  This results in the highly reliable and the most thin & compact switch-mode CO2 laser power supply.
  • Ballastless Operation
  • High Power to 600W
  • Popular Models
  • No Maintenance Required
Key Features

  • Series Resonant Topology:
    Since the first product was developed in early 1980s, Lic’s switch-mode CO2 laser power supply has used the series resonant topology, which make a switching current "sinusoidal", or ”zero-current switching” to make the switching loss minimal and is able to push a very high current into the secondary circuit in very short time.  This sinusoidal switching, or zero-current switching technology makes Lic’s products high efficient, compact, and reliable power supply.

  • Compact 600W Water Cooled CO2 Laser Power Supply
  • Designed for Portable CO2 Laser Systems
  • Long Run Products
  • Ballastless Operation
  • Popular Models
  • No Maintenance Required
Specifications
Output Power:
600W
Striking Voltage:
25KV *1)
Operating Voltage
4KV to 20KV
Output Configuration:
P: Single Output, PD: Dual outputs
Operating Current
Total 70mA maximum
Operating Mode
CW & PULSE
Pulse Rep. Rate
DC to 2KHz
Pulse Width
100µs to DC
AC Input Voltage
80-120V, or 180-240V 
Efficiency
Greater than 87%
Regulation
Less than 2%
Protection Mode
H.V. Over current, H.V. Over voltage, IGBT Over current, Over Temperature
Control Signal
0-5V Ground referenced signals:
LASER, READY, POWER, FAULT, RESET, GND, +5V
Refer to Control Signal for detail
Options:
*1): Striking Voltage up to 35KV
*2): H.V Current/Voltage Readout
Dimension
4.8"(H)x3.2"(W)x7.5"(L) inch excluding inlet/outlet water tubes
Weight
6.8 lb
Cooling
Water Cooled, 1/4" OD copper inlet/outlet
Products