Manuals
Manuals   |   
Installation   |   
Control Signals   |   

CO2 laser power supplies:

LIC Engineering is the one of world's leading providers of innovative CO2 Laser Power supply. Our specialties are for:
1) The most compact CO2 laser power supply,
2) High power water-cooled laser power supply,
3) Multi-output CO2 laser power supply,
4) Ballastless & Super Pulse CO2 laser power supply,
5) Power supply for diffusion-cooled CO2 slab lasers and fast-axial-flow CO2 lasers.
6) High efficient switch mode laser power supply.

MANUAL FOR CO2 LASER POWER SUPPLIES


Laser Diode Drivers/Pulse generators & Special Products:

 LNS-XXXX/HP/QCW/USB-series:
The LNS-XXXX/HP/QCW/USB-series high power laser diode driver are designed to drive a laser diode in LSP mode (LIC Super Pulse), which generates very high peak current and voltage to 500A/500V with the rise times between 500ps-15ns (depend on the models selected).  All functions are controlled by user's PC screen through a USB interface.
Special made stripline connects directly from the driver to the Laser Diode you use. The length of the stripline ranges from 1” to 15” depends on the models and applications.

MANUAL FOR LWG-XXXX/HP/QCW/-USB

MANUAL FOR SCOPE-USB

MANUAL FOR LNS-XXXX/HP/QCW/-USB

PULSE SETTING MANUAL FOR LNS-XXXX/QCW/HP/USB


LSP-XXXX-XX-series:
The LSP-XXXX-XX-series high power laser diode driver/pulse generator are designed to drive a laser diode in LSP mode (LIC Super Pulse), which generates very high peak current and voltage to 5KA and 15KV respectively with the rise times between 100ps-15ns (depend on the models selected).
Special made stripline connects directly from the driver to the Laser Diode you use. The length of the stripline ranges from 1” to 15” depends on the models and applications.

MANUAL FOR LSP-XXXX-XX


HVC-XXXX/USB-series:
The HVC-XXXX/USB-series high power/high voltage swithes/plasma discharge power supplies are designed to drive customer's specific loads, that may not be 50 ohm.  There is a custom made stripline supplied that designed for a customer's specific load i mpedance.  All functions are controlled by user's PC screen through a USB interface.

MANUAL FOR HVC-XXXX/USB

PULSE SETTING MANUAL FOR HVC-XXXX/USB


LD-XXXXQCW:
High Power, High Speed, High Current Laser Diode Driver/Power Supply, LD-XXXXQCW are designed to drive a laser diode in CW, QCW (Quasi Continuous Wave), and Normal Pulse mode. LD- XXXXQCW has achieved QCW high power up to 1KV/1KA/1MW, and a fastest rise time of 50-100 ns, and high peak current up to 1KA in QCW/Pulse mode.

Special made stripline enables the distance from the unit to a laser diode 1m (standard), or 2m (optional) keeping the rise time of 50-100ns & the minimum pulse width of 200ns. High Power QCW laser diode driver LD- XXXX/QCW contains a digital monitor scope (the rise time of 3.5ns,or 7ns) and a high speed current sensing device to watch the real load current as well as a drive signal at the same time so that user can monitor the real operating condition without using any extra instruments and devices.

MANUAL FOR LD-XXXX/QCW


LS-XXXX/XX-series:
The LS-XXXX/XX-series high power gas discharge/plasma discharge power supplies are designed to drive customer's specific loads, that may not be 50 ohm.  There is a custom made stripline supplied that designed for a customer's specific load i mpedance. 

MANUAL FOR LS-XXXX